AC Variable Speed Drives Less Than 500hp
(Click here to go to our store to browse inverter drives)

Note: While many of our Hitachi drives can operate with either single-phase or three-phase input current, the ONLY type of motor they can control is a three-phase motor. The drives below cannot be used to control the speed of single-phase motors.
X200 Series....high performance at a terrific price!
    Powerful features:
  • Contactor-style package (power in at top/motor out at bottom)
  • Emergency stop function
  • Improved trip avoidance
  • Advanced logic and calculate functions
  • Suitable for side-by-side mounting
  • Patented micro-surge voltage suppression
  • Non-stop operation after instantaneous power failure
  • Built in RS-485 Modbus/RTU
  • Ratings ¼ to 3 hp [input current 230 V, single or 3-phase]; 5 to 10 hp [input current 230 V, 3-phase]; ½ to 10 hp [input current 460 V, 3-phase]
  • For use with 3-phase motors only!
  • Purchase information is available in our store

NOTE: The X200 series has superseded the L200 series. X200 models offer MORE FEATURES and LOWER COST.
WJ200 Series....new product line (replaces SJ200 Series)
Instruction Manual
Quick Reference Guide
Sales Brochure

Click here to download drive programming software.

Purchase information is available in our store

 

Note: older SJ200 drives MAY be available for a period of time, but they are being phased out. Contact us if you have any questions. We will be happy to help you transition to other products.

  • High starting torque and dramatically improved speed stability thanks to advanced sensorless vector control
  • Simplified autotuning procedure
  • Easy setup and operation via standard integral keypad, optional enhanced keypad or via PC software
  • Dynamic braking transistor in all models
  • EasySequence (EzSQ) PLC-like functionality built in
  • Simple position control capability
  • Capable of driving permanent magnet as well as standard induction motors
  • Dual rated for CT/VT applications
  • New and more effective trip avoidance functions, safe-stop function and much more…
  • Ratings:
    • 1/8 to 3hp [input current 230V, single phase]
    • 1/8 to 20hp [input current 230V, three phase]
    • 1/2 to 15hp [input current 460V, three phase]
  • For use with 3-phase motors only!
  • Purchase information is available in our store
SJ700 Series (this line supersedes the SJ300 line of drives)

Main Brochure
Instruction Manual
Service Manual

Click here to download drive programming software.

Hitachi's Full Featured Drive Series

  • Easy operation and setup by standard keypad
  • Powerful high-torque performance – 200% @ 3 Hz
  • Internal DB transistor up to 22 kW (30 hp)
  • EzSQ Internal PLC-like controller
  • Position control function offers servo-like performance
  • Long-life, easy-to-maintain design
  • NEMA1 conduit box optional
  • EMI Filter Integrated up to 110 kW
  • Conformity to global standards: UL, c-UL, CE and c-Tick
  • Ratings for the SJ700 line: 1/2 to 75hp, 230V, 3 phase; 1 to 125hp, 460V, 3 phase
  • For use with 3-phase motors only!
  • Purchase information is available in our store

3 phase 220VAC drives can be run on 220VAC single phase. The drive has to be upsized in amp rating. Click here to download a 2-page spec sheet for details.

SJ300 Series (please see SJ700 series information above)
Note: The SJ300 series of drives is being phased out. The replacement series is the SJ700. While there may be some limited availability of SJ300 products for a while, it is strongly recommended that you consider SJ700 for all present and future applications.
3 phase 220VAC drives can be run on 220VAC single phase. The drive has to be upsized in amp rating. Click here to download a 2-page spec sheet for details.
L100 Series
  • 115 VAC single phase input current
  • For control of 1/4 hp, 1/2 hp and 1 hp 3-phase motors
  • All other L100 products have been discontinued. Customers are urged to consider the X200 series detailed above.
  • Purchase information is available in our store
L300P Series
  • Automatic energy saving function for your fan and pump applications
  • Easy operation with a multilingual operator panel
  • Compact design
  • Network compatibility
  • Carrier frequency selectable to 12kHz for quiet operation
  • Ratings: 15 to 75hp [input current 230V, 3 phase]; 15 to 175hp [input current 460V, 3 phase]
  • For use with 3-phase motors only!
  • Purchase information is available in our store
3 phase 220VAC drives can be run on 220VAC single phase. The drive has to be upsized in amp rating. Click here to download a 2-page spec sheet for details. 
SJ100 Series
 
The SJ100 series is now obsolete. Customers are urged to consider the SJ200 model detailed above.
Operator Interface/Networking Devices 
The Hitachi Serial Communications Operator
Interfaces, SC-OPE 3H and SC-OPE 3I, are easy-to-use inverter operator panels. Their four-line dot matrix displays show inverter status, and work in conjunction with their keypads to provide inverter control and parameter editing capability. The SC-OPE can be directly mounted on the inverter (in the case of the SJ300 and L300P only), panel-mounted (with the optional bezel kit), or DIN-rail mounted inside a panel (also with the optional bezel kit).
More Info
Top
1302 Richard Street, Salisbury, North Carolina 28144
Tel: 704.639.0207 • Fax: 704.639.9866 • E-mail: info@controlresourcesinc.com
Home | Our Store | About Us | Circuit Breakers & Motor Controllers | Electrical Disconnects | Fuse Holders | Power Distribution Block | Power Supplies
Push Button Switches | Selector Switches | Relays | Relay Bases | Terminal Block | Electrical Enclosures | DIN Rail | Wire Duct | Stack Lights | Light Curtains
Pneumatic Actuators | Air Preparation | Brass Fittings | Breathers & Mufflers | Flow Controllers | One-Touch Fittings | Pressure Switches | Tubing | Valves
Linear Rail & Bearings | Linear Stages | AC Variable Speed Drives | Servo Systems | Value Added Services | Downloads | Our Linecard | Contact Us